Covid-19 is the biggest challenge humanity is facing in the recent times. Millions of covid patients across India are struggling to breathe. Day by day the infections in the country are increasing and its becoming difficult to cope up with this situation. Oxygen levels in patients are decreasing resulting in increased number of deaths. Hospitals are becoming short of oxygen supplies due to overflow of patients. So you should be ready for any kind of emergency. In that case you should try using oxygen concentrators.Oxygen concentrators can help buy crucial time in the initial phases of COVID-19, when the patient’s oxygen levels drop.
Follow the following steps to use oxygen concentrators-
1.Position the machine 1 to 2 feet (0.30 to 0.61 m) from the wall and furniture. The machine pulls in oxygen and releases exhaust, so plenty of space is needed. Make sure the area around it is unobstructed.
2. Connect your humidification bottle if it is prescribed tp you. Fit the threaded cap on your humidification bottle into the outlet on your oxygen concentrator. Slowly twist your bottle until it’s securely and completely attached to the machine.
3. Attach your oxygen tubing to either the humidification bottle or an adapter. If you’re using a humidification bottle, you will see a port on the bottle. This is where you have to insert your oxygen tubing.
4. Make sure your air filter is in place. Your oxygen concentrator has an air inlet filter that removes particles from the air. It should be located on the side of your machine. Now start your oxygen concentrator at least 15-20 minutes before using it.
5. Plug it into a grounded outlet that’s not in use. Your oxygen concentrator should be the only item plugged into that outlet, as it draws a lot of power. Switch the power button to the “on” position.
6. Now adjust the level of oxygen. Locate the liter control knob or switch on your oxygen concentrator.Turn the knob or switch until it points to your prescribed number.
7. Now Put on Your Mask or Nasal Cannula. Breathe through your mask. Switch the power to “off” when the machine isn’t in use.
Sony vaio laptop support
dell printer support
laptop support
Call For technical support
Recent Comments